Stub Vertical Antenna for the 6- and 2- meter Band

Credit Line: Forum from:

www.cqham.ru

By: Igor Vakhreev, RW4HFN

Below described simple dual band vertical antenna for the 6- and 2- meter Band. Model of the antenna was simulated by RW4HFN. Antenna may be made from a rigid copper/aluminum wire. Antenna does not require any tuning elements. Antenna made according to the description already should work at the two bands.

Figure 1 shows design of the antenna.

Figure 2 shows Z of the antenna at the 2- meter band. Figure 3 shows SWR of the antenna at the 2- meter band. Figure 4 shows DD of the antenna at the 2- meter band.

Figure 5 shows Z of the antenna at the 6- meter band. Figure 6 shows SWR of the antenna at the 6- meter band. Figure 7 shows DD of the antenna at the 6- meter band.

The MMANA model of the Simple Three Element Vertical Antenna for the 2- meter Band may be loaded: http: //

www.antentop.org/020/stub_vertical_rw4hfn_020.htm

Figure 1 Stub Vertical Antenna for the 6- and 2- meter Band

www.antentop.org

Page- 59